VW, did anyone have you do a "hard" reset on the netgear router?

VW, did anyone have you do a "hard" reset on the netgear router?

Um...I don't think so.

Many routers are designed so that if they are somehow hopelessly scrambled, then you can reset them with a pin or a pencil that fits a small recessed button. (Like macs used to have paper clip buttons for ejecting a floppy)

Here's how to do a reset: [link]

And The step by step instructions that netgear has for troubleshooting an Internet connection: [link]

See how far you get trying a hard reset, then startng from scratch. I've seen routers pronounced "dead" by tech support suddenly work.

Also, make sure the correct power adapter is plugged into the correct unit. I had a friend who had lousy Wifi, and it turned out he had accidently plugged the AC adapter for his speakers (26 volts) into his router (12 volts). I was amazed it still worked at all.

Unrelated iBook stuff, in handy bullet-point format:

• I just discovered that the CD/DVD drive in my iBook has topped working. When I stick a CD in it, nothing happens. I don't hear anything (such as the drive spinning up or the read/write head moving) and no application sees anything in the drive. So, I'm guessing the drive probably needs to be replaced; is there anything else that could be causing the problem that I can check?

• The other day (eta: after the optical drive failed) I spilled part of a glass of water into my iBook (I don't think that much water got into it). I didn't notice at first. The screensaver had turned the screen off (but it was not asleep, as it's set to never sleep) and it wouldn't come back on. Once I noticed the water, I unplugged the power cable and took the battery out. Then I flipped the keyboard off and set the iBook upside-down for a day. Today, it seems to be working fine. I'm guessing I dodged a bullet, but is there anything I should be looking out for?

• My friend Miriam is having problems with her G4 iBook. The trackpad suddenly stopped working. I think it started working again for a bit, then failed for good. (Rebooting doesn't help.) Currently she's using a USB mouse, which works fine. Anyone have any ideas?

Can you eject the CD? Did you try more than one CD?

Yes. And yes.

eta: Also tried burning a blank CD.

eta²: On my iBook, I can eject a CD by holding the F12 key down for a second or two. Which is cool, as there's now no CD icon on the desktop to drag to the trash.

Yeah, your drive is frelled.

It sounds like Miriam's mousepad is frelled, too. Hi, Miriam!

If ya wanna totally wipe out an XP installation and reinstall, what do you do? (We suspect a virus, so we wanna kill the boot sector too.)

If ya look here [link] they say you can just boot from the XP install disk and wipe out the previous partition before the install:

Because an existing Windows XP installation is detected, you will be presented with a screen asking if you wish to repair it. Press to bypass the process (do not repair).

Wiping your Hard Drives clean

The next screen you are presented with is where most people have difficulty. You will be presented with a screen offering some choices of action, and a list of existing hard drive partitions which also indicate existing Windows installations. My suggestion for the best course of action is this:

* Remove existing partitions
* Create new NTFS partitions
* Install Windows XP on the first partition of your Primary hard drive

Highlight the first partition, press <D> to indicate you wish to delete it, and follow the prompts to remove the partition. Continue the process for other partitions. When you've finished removing the partitions, and are left with a list indicating the drives and the ‘Unpartitioned space' they contain, highlight your primary drive and press <C> to indicate you wish to create a new partition. Type the size (in Megabytes) you wish the partition to be, or press <ENTER> to create a partition using all available space on the drive. Repeat the process until you've created all the partitions you wish to have.

Does this wipe out the boot sector? Should I use fdisk?

eta: I think I'm gonna use zap: [link]

Tommy, before you blank the thing, you might want to think about backing up your Windows activation files. It might save you some hassle later when you have to reactivate your installation. [link]

Thanks!